Shop Product by Categories

Ai 6″ Stainless Turnkey Thin Film Distillation Gen 2 ETL


SKU: TS-6 Category:




Continuous distillation, a form of distillation, is an ongoing separation in which a mixture is continuously (without interruption) fed into the process and separated fractions are removed continuously as output streams. Distillation is the separation or partial separation of a liquid feed mixture into components or fractions by selective boiling (or evaporation) and condensation. The process produces at least two output fractions. These fractions include at least one volatile distillate fraction, which has boiled and been separately captured as a vapor condensed to a liquid, and practically always a bottoms (or residuum) fraction, which is the least volatile residue that has not been separately captured as a condensed vapor.


  • Jacketed main evaporator body increases efficiency and protects user from high surface temperature
  • High precision PTFE rollers (or blades) and inner stainless steel surface allow a complete and uniform thin film on the heated surface and leave minimum process residue
  • Easy accessed low-placed jacketed material feeding flask
  • Improved simple design jacketed feeding tube for easy maintenance
  • Pre-installed cooling/heating tubing with fluid direction labels and M16 ports
  • Driving motor with magnetic coupling sealing ensures high vacuum level
  • Constructed with stainless steel and Viton gaskets for ultimate corrosion resistance
  • Auto delay safety circuit for diffusion pump cooling
  • Heavy-duty stainless steel frame with swivel casters and leveling feet for mobility and stability
  • Redesigned drain port with sight glass for easy cleaning and maintenance.
  • Ai on-site installation within contiguous US included
  • Liquid Nitrogen (in cold trap) is highly recommended for system to get to optimal vacuum levels
  • ETL tested to UL and CSA standards



  • Never fill circulated heaters or chillers with water, always use Ai or manufacturer’s recommended fluid
  • Always leave ample fluid space in heater reservoir to allow fluid heat expansion
  • Always keep system vacuum passage or drain valve open when heating up circulation jackets
  • Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits




Across International 6″ Stainless Steel Thin Film Introduction





Part description


Part image

HUBER KISS 205B 200C 5L 14L/min, 2kW heater, 230V x 2
HUBER CC-308B Pilot ONE 300C 8.5L 25L/min, 3kW heater, 230V x 1
HUBER KISS K6 -25C to 200C 4.5L 14L/min, 2kW heater, 230V x 1
4 pcs
PolyScience IP-80 or Huber TC100 cooler 1 pc

Welch CRVPro 30 22 CFM 0.3 micron, 230V with 1417F exhaust filter

1 set
Agilent AX-65 air-cooled diffusion pump with 250W heater, 230V 60Hz 1 pc
Agilent diffusion pump oil (do NOT fill more than 30mL at a time)
40 mL
Agilent PCG-750 Pirani diaphragm high vacuum gauge with power
1 pc

Stainless steel manifold with two on/off valves for vacuum pump and

diffusion pump

1 pc

TS-6 SST Thin Film evaporator body with 2 cold traps & 3 gear


1 set
DURATHERM S -66C to 366C thermo transfer fluid 5-gallon (18.9L)
2 pcs
Antifreeze 1-gallon (3.78L)
3 pcs
1L cold trap collection flask, glass
4 pcs
Viton sealing gasket 2 sets
KF25 bellow, clamps, adapter, tubing
1 set
User’s manual 1 pc


Additional information

Weight 1941.000000 lbs

Delivery liftgate service



, , , , , , , , , , ,

UL, CSA, CE certification

, , ,


Discount Tier

Is Accessory

Must Ship Freight
On sale
Possible Packing Boxes


Dimension Height

Dimension Length

Ship Separately
Dimension Width